Sleep Talking PCs Save Energy and Money
San Diego, CA, April 23, 2009 -- Personal computers may soon save large amounts of energy by “sleep talking.” Computer scientists at UC San Diego and Microsoft Research have created a plug-and-play hardware prototype for personal computers that induces a new energy saving state known as “sleep talking.” Normally PCs can be in either awake mode—where they consume power even if they are not being used—or in a low power sleep mode—where they save substantial power but are essentially inactive and unresponsive to network traffic. The new sleep talking state provides much of the energy savings of sleep mode and some of the network-and-Internet-connected convenience of awake mode.
|UC San Diego computer science Ph.D. student Yuvraj Agarwal presented this work on April 23 at the USENIX Symposium on Networked Systems Design and Implementation (NSDI 2009).|
“Large numbers of people keep their PCs in awake mode even though the PCs are relatively idle for long blocks of time because they want to stay connected to an internal network or the Internet or both,” said Agarwal. “I realized that most of the tasks that people keep their computers on for—like ensuring remote access and availability for virus scans and backup, maintaining presence on instant messaging (IM) networks, being available for incoming voice-over-IP (VoIP) calls, and file sharing and downloading—can be achieved at much lower power-use levels than regular awake mode,” said Agarwal.
Following this realization, the team built a small USB-connected hardware and software plug-in system that allows a PC to remain in sleep mode while continuing to maintain network presence and run well-defined application functions. It supports instant messaging applications, VoIP, large background web downloads, peer-to-peer file sharing networks such as BitTorrent, and remote access. The computer scientists say their system is easily extensible to support other applications.
|Somniloquy prototype co-invented by UC San Diego computer science Ph.D. student Yuvraj Agarwal. The plug-and-play hardware prototype for personal computers induces a new energy saving state known as “sleep talking.”|
The goal of Somniloquy is to encourage people to put their PCs in sleep mode more often, for example when they are not being used for computationally demanding tasks. “Reducing energy consumed by wall-powered devices, especially computing equipment, offers a huge opportunity to save money and reduce greenhouse gasses,” said Agarwal.
“Somniloquy uses a very small low-power computer. It has a low-power processor, some memory, a lightweight operating system, and a small amount of flash to store data. Everything is scaled down and extremely energy efficient,” said Agarwal, a self described “computer systems” researcher who uses hardware insights to build better energy-efficient computer systems.
Somniloquy’s low-power secondary processor functions at the PC’s network interface. It runs an embedded operating system and impersonates the sleeping PC to other hosts on the network. Somniloquy will wake up the PC over the USB bus if necessary. For example, during a movie download, when the flash memory fills up, Somniloquy will wake up the PC and transfer the data. When the transfer is complete, it will go back to sleep mode and Somniloquy will again impersonate the computer on the network.
The current prototypes work for desktops and laptops, over wired and wireless networks, and are incrementally deployable on systems with an existing network interface. It does not require any changes to the operating system on the PC, to routers or other network infrastructure, or to remote application servers.
The researchers evaluated Somniloquy in various settings and say that it consumes 11 to 24 times less power than a PC in idle state, which could translate to energy savings of 60 to 80 percent depending on their use model.
In the future, Somniloquy could be incorporated into the network interface card of new PCs, which would eliminate the need for the prototype’s external USB plug-in hardware.
Yuvraj Agarwal worked on this project when he was an intern at Microsoft Research, Cambridge in the summer of 2007, and continued afterwards at UC San Diego. Steve Hodges, Ranveer Chandra, James Scott, and Victor Bahl from Microsoft Research are Somniloquy co-inventors and authors on the NSDI 2009 paper. Agarwal’s Ph.D. advisor and paper-coauthor is computer science professor Rajesh Gupta from UC San Diego’s Jacobs School of Engineering.
“Somniloquy: Augmenting Network Interfaces to Reduce PC Energy Usage,” by Yuvraj Agarwal from UC San Diego, Steve Hodges, Ranveer Chandra, James Scott, and Paramvir (Victor) Bahl from Microsoft Research, and Rajesh Gupta from UC San Diego, was presented on April 23, 2009 at USENIX Symposium on Networked Systems Design and Implementation.
Author contact information:
UC San Diego computer science Ph.D. student from the Jacobs School of Engineering
yuvraj AT cs DOT ucsd DOT edu
Jacobs School of Engineering